Does The NVIDIA GeForce 8GB RTX 3050 Hashrate Allow For The Construction Of Complex And Profitable Mining Rigs?
The NVIDIA GeForce RTX 3050 Hashrate (8GB GDDR6) is one of the entry-level GPUs that NVIDIA will deliver in early 2022. Continue reading to learn more about the characteristics, overclocking settings, and the RTX 3050 hashrate (8GB) for various algorithms.
Concerning gaming efficiency, the RTX 3050 8GB competes favorably with the older GTX 1660 Ti, delivering consistent performance at 1080p. However, how does the RTX 3050 8GB perform when it comes to mining?
- NVIDIA CUDA® Cores: 2560
- Tensor Cores: 80
- RT Cores: 20
- Single Precision Performance: 9.098 TFLOPS
- Base Clock: 1777 MHz
- Boost Clock: 1552 MHz
- Memory Speed: 14 Gbps
- Standard Memory Config: 8 GB GDDR6
- Memory Interface Width: 128-bit
- Memory Bandwidth: 224.0 GB/sec
- Maximum Digital Resolution: 7680×4320 @60Hz
- Graphics Card Dimensions: Length : 9.5″ – Width : 4.4” – Slot Width : Dual-slot
- Graphics Card Power: 130 W
- Maximum GPU temperature: 93 °C
- Recommended System Power: 550 W
- System Interface: PCI Express 4.0 x8
- Power Connectors: 1x 8-pin
- Display Connectors: 1x HDMI, 3x DisplayPort
- DaggerHashimoto [ EtHash : (ETH) & (ETC) ] Ethereum Mining Hashrate: 14 MH/s
- Octopus Mining Hashrate: 25 MH/s
- KAWPOW Mining Hashrate: 13 MH/s
- Autolylos Mining Hashrate: 60 MH/s
- ZelHash Mining Hashrate: 22.4 Sol/s
The NVIDIA RTX 3050 is a budget-friendly bitcoin mining GPU. It's a reasonable choice for individuals interested in beginning home mining. It consumes less power, is less expensive, and appears to be more plentiful than the other NVIDIA RTX 30 Series cards.
The NVIDIA RTX 3050, on the other hand, is not ideal for people trying to build complicated and extremely successful mining rigs. The card utilizes NVIDIA's Lite Hash Rate (LHR) algorithm, which limits the GPU's mining capabilities. As a result, it is not suggested to purchase these cards for mining unless they are available at a discount. You are better off purchasing one of the more advanced NVIDIA RTX 30 or 20-series cards.
There is talk of a weaker RTX 3050 model. According to reports, the less powerful version contains 4GB of VRAM rather than 8GB of VRAM, which means it will perform much worse in terms of mining performance. On the other hand, there is speculation about an RTX 3050 Ti variant. This card is said to have 6GB or 12GB of VRAM and 3072 CUDA cores, which could result in increased gaming performance.
Nonetheless, these new RTX 3050 models will almost certainly use LHR technology, as do the majority of recent NVIDIA cards. As a result, users should be prepared and refrain from setting unreasonable expectations for mining performance. Additionally, the global chip shortage and GPU market scenario remain dire. Numerous cards remain unavailable, including the RTX 3050. Even if one is discovered, it will almost certainly come at a steep price, typically considerably higher than the MSRP.