NVIDIA GeForce 2GB GTX 1050 and 4GB GTX 1050 TI Hashrate Of Mining Compared!
Due to worldwide chip shortages, the majority of cards are out of stock, and those that are available are far more expensive than the MSRP. If your budget is limited and you're looking for a card (or numerous cards) that may be available, consider the NVIDIA GeForce GTX 1050 and GTX 1050 TI hashrate.
Author:Stefano MclaughlinReviewer:Camilo WoodMar 19, 2022128.2K Shares1.7M Views
Due to worldwide chip shortages, the majority of cards are out of stock, and those that are available are far more expensive than the MSRP. If your budget is limited and you're looking for a card (or numerous cards) that may be available, consider the NVIDIA GeForce GTX 1050 and GTX 1050 TI hashrate. These cards are on the low end, but when combined in a mining rig, they can still generate some power, especially on alt coins other than Ethereum.
Continue reading for more information on the specifications, hashrates, and a few movies on these cards.
NVIDIA GeForce GTX 1050 2GB Specifications
- NVIDIA CUDA® Cores: 640
- Base Clock: 1354 MHz
- Boost Clock: 1455 MHz
- Memory Speed: 7 Gbps
- Standard Memory Config: 2 GB GDDR5
- Memory Interface Width: 128-bit
- Memory Bandwidth: 112 GB/sec
- Maximum Digital Resolution: 7680×4320 @60Hz
- Graphics Card Dimensions: Height: 4.38″ – Length: 5.7″ – Width: 2-Slot
- Maximum GPU Temperature: 97°C
- Graphics Card Power: 75 W
- Recommended System Power: 300 W
- System Interface: PCI Express 3.0 x16
- Single Precision performance: 1862 GFLOPS
- Display Connectors: 1x DVI, 1x HDMI, 1x DisplayPort
NVIDIA GeForce GTX 1050 2GB Mining Hashrate For Every Algorithm (Power Consumption 65 Watts/Hr)
- DaggerHashimoto [ EtHash : (ETH) & (ETC) ] Ethereum Mining Hashrate: 2.5 MH/s consuming 75 W
- Equihash Mining Hashrate: 525.72 MH/s
- KawPow Mining Hashrate: 4.90 MH/s
- ZHash Mining Hashrate:18.72 Sol/s
- NeoScrypt Mining Hashrate: 0.37 MH/s
- Decred (DCR) Mining Hashrate: 0.85 GH/s
- Blake2s Mining Hashrate: 1.22 GH/s
- Lyra2Z Mining Hashrate: 0.49 MH/s
- Lyra2Rev2 Mining Hashrate: 12.55 MH/s
- CryptoNightR Mining Hashrate: 0.17 kH/s
- X16R Mining Hashrate: 6 MH/s
- X16Rv2 Mining Hashrate: 5.65 MH/s
- Eaglesong Mining Hashrate: 0.21 GH/s
- Handshake Mining Hashrate: 0.063 GH/s
- BeamV3 Mining Hashrate: 3 Sol/s
NVIDIA GeForce GTX 1050 2GB Mining Hashrate Review
GTX 1050 Mining Profitability | March 2018
NVIDIA GeForce GTX 1050 TI 4GB Specifications
- NVIDIA CUDA® Cores: 768
- Base Clock: 1290 MHz
- Boost Clock: 1392 MHz
- Memory Speed: 7 Gbps
- Standard Memory Config: 4 GB GDDR5
- Memory Interface Width: 128-bit
- Memory Bandwidth: 112 GB/sec
- Maximum Digital Resolution: 7680×4320 @60Hz
- Graphics Card Dimensions: Height : 4.38″ –
- Length : 5.7″ – Width: 2-Slot
- Maximum GPU Temperature: 97°C
- Graphics Card Power: 75 W
- Recommended System Power: 300 W
- System Interface: PCI Express 3.0 x16
- Single Precision performance: 2138 GFLOPS
- Display Connectors: 1x DVI, 1x HDMI, 1x DisplayPort
NVIDIA GeForce GTX 1050 TI 4GB Mining Hashrate For Every Algorithm (Power Consumption 70 Watts/Hr)
- DaggerHashimoto [ EtHash : (ETH) & (ETC) ] Ethereum Mining Hashrate: 15 MH/s consuming 70 W
- Equihash Mining Hashrate: 12 MH/s
- Keccak Mining Hashrate: 279 MH/s
- KawPow Mining Hashrate: 5.21 MH/s
- Autolykos Mining Hashrate: 23 MH/s
- ZHash Mining Hashrate: 21.16 Sol/s
- NeoScrypt Mining Hashrate: 0.41 MH/s
- Blake2s Mining Hashrate: 1.45 GH/s
- CryptoNightR Mining Hashrate: 0.17 kH/s
- X16R Mining Hashrate: 6.98 MH/s
- X16Rv2 Mining Hashrate: 6.52 MH/s
- Eaglesong Mining Hashrate: 0.24 GH/s
- Handshake Mining Hashrate: 0.073 GH/s
- BeamV3 Mining Hashrate: 5 Sol/s
- RandomXmonero Mining Hashrate: 0.1 kH/s
GTX 1050TI Mining Hashrate Testing & OverClock Settings
NVIDIA GeForce GTX 1050 TI 4GB Overclock Settings
To extract a little more juice from these GPUs, you can overclock them using the following settings:
- Core Voltage: N/A
- Core clock: +150 MHz
- Memory clock: +900 MHz
- Power Limit: 90% or 66 W
- Fan Speed: 70% ± based on your temps.
The Bottom Line
Due to its tiny VRAM of only 2GB, the NVIDIA GeForce GTX 1050 2GB is not recommended for mining. Due to the rising size of the Ethereum DAG, which has exceeded 4GB, cards such as the GTX 1050 2GB with 4GB or less of VRAM are unable to mine Ethereum.
Although the GTX 1050 TI 4GB has more VRAM than the GTX 1050 2GB, it is still insufficient to mine Ethereum. On the plus side, the card may be used to mine other cryptocurrencies such as Ethereum Classic and Ravencoin, which can be exchanged for your preferred coin.
Jump to
NVIDIA GeForce GTX 1050 2GB Specifications
NVIDIA GeForce GTX 1050 2GB Mining Hashrate For Every Algorithm (Power Consumption 65 Watts/Hr)
NVIDIA GeForce GTX 1050 2GB Mining Hashrate Review
NVIDIA GeForce GTX 1050 TI 4GB Specifications
NVIDIA GeForce GTX 1050 TI 4GB Mining Hashrate For Every Algorithm (Power Consumption 70 Watts/Hr)
NVIDIA GeForce GTX 1050 TI 4GB Overclock Settings
The Bottom Line
Stefano Mclaughlin
Author
Camilo Wood
Reviewer
Latest Articles
Popular Articles